3 Easy Steps on How to Clean Bug A Salt Gun

Bug A Salt guns have become popular for pest control, but proper maintenance, especially cleaning, is essential for their optimal performance. This comprehensive guide will detail the step-by-step process on how to clean Bug A Salt gun, ensuring its effectiveness and longevity.

Introduction to Bug A Salt Guns

Bug A Salt guns, also known as salt guns, have revolutionized pest control by offering an eco-friendly and entertaining solution for dealing with pesky insects.

These air-powered devices utilize salt as ammunition, providing a non-toxic and effective means of eradicating flies, mosquitoes, and other small pests.

Importance of Cleaning Your Bug A Salt

Bug A Salt gun is a fun and effective way to control pests in your home, garden or campsite. The consistent use of this gun leads to the accumulation of residues such as salt, debris, and insect remains, which can impede its performance.

Like any other tool, Bug A Salt gun requires proper maintenance and cleaning to keep it in good shape and performance.

Regular cleaning is crucial not only for maintaining the gun’s effectiveness but also for ensuring its longevity and preventing potential damage or corrosion.

How to Clean Bug A Salt Gun: Step-by-Step Guide

Cleaning Bug A Salt gun is not difficult, but it does require some attention and care.

We will now discuss how to clean Bug A Salt gun in a few simple steps, using some common household items.

But remember to refer to the specific cleaning instructions provided by the manufacturer for your Bug A Salt gun for any additional or specific cleaning recommendations.

Step 1: Empty the Salt Hopper

The first step in cleaning Bug A Salt gun is to empty the salt hopper, which is the container that holds the salt.

This is important because the salt can get moist or clumpy over time, which can affect the performance and accuracy of the gun.

How to Empty the Salt Hopper

To empty the salt hopper, follow these steps:

  • Shake the gun vigorously and bang it against your hand several times. This will cause the salt to fall out of the hopper and onto the ground.
  • Use a cloth or a brush to wipe the inside of the hopper and remove any remaining salt.
  • If there are any grains that are stuck in the hopper, use a toothpick or a needle to poke them out. Be careful not to damage the hopper or the salt pin while doing this.

Tips and Warnings

  • Make sure to empty the salt hopper over a trash can or a sink, as the salt can be messy and harmful to plants and animals.
  • Do not use water or any other liquid to clean the salt hopper, as this can cause the salt to dissolve and clog the gun.

Step 2: Flush the Salt Pin with Hot Water

The second step in cleaning Bug A Salt gun is to flush the salt pin with hot water, which is the metal rod that pushes the salt out of the hopper.

This is important because the salt pin can get clogged with salt residue, which can prevent the gun from firing properly.

How to Flush the Salt Pin with Hot Water

To flush the salt pin with hot water, follow these steps:

  • Warm the water until it’s hot but not boiling. Boiling water can damage the plastic parts of the gun.
  • Drip a few drops of hot water into the salt hopper, where the salt pin is located. You can use a dropper, a syringe, or a spoon to do this.
  • Cock the gun and press the salt pin with your finger. You should feel the pin moving freely and popping up. If not, repeat the previous step until the pin is clear.

Tips and Warnings

  • Do not use too much water, as this can cause the salt to dissolve and leak out of the gun.
  • Do not use any other liquid or substance to flush the salt pin, as this can damage the gun or cause corrosion.
  • Do not force the salt pin with a tool or your finger, as this can bend or break the pin.

Step 3: Dry the Gun Thoroughly

The third and final step in cleaning Bug A Salt gun is to dry the gun thoroughly before reloading with salt.

This is crucial because any moisture left in the gun can cause the salt to dissolve and leak out of the gun, or form crystals that can block the salt pin or the barrel.

How to Dry the Gun Thoroughly

To dry the gun thoroughly, follow these steps:

  • Use a hairdryer to blow hot air into the salt hopper and the barrel. This will evaporate any water droplets and dry the gun faster.
  • Alternatively, you can leave the gun in the sun for a few hours, preferably on a sunny and dry day. The sun’s heat and light will also help to dry the gun and kill any bacteria or mold that may have grown in the gun.
  • Make sure to turn the gun over and shake it gently every once in a while to ensure that all parts of the gun are exposed to the air and the sun.

Tips and Warnings

  • If you don’t have time or access to a hairdryer or the sun, you can also leave the gun in a warm and dry place, such as a closet or a cabinet. However, you will have to wait at least 48 hours for the gun to dry completely before reloading with salt.
  • Do not store the gun in a cold or damp place, such as a basement or a garage, as this may cause the salt to clump up again and damage the gun.

Also Read: How to Make Bug A Salt More Powerful

Maintaining the Gun for Longevity

Regular maintenance practices significantly contribute to the Bug A Salt gun’s longevity and optimal performance:

Regular Cleaning Frequency

Clean the gun after each use or, if used infrequently, at least once a month.

Proper Storage

Store the gun in a dry, cool place to prevent moisture buildup, which can potentially damage internal mechanisms.

Lubrication of Moving Parts

Periodically apply the recommended lubricant to movable parts to prevent rust and ensure smooth operation.

Routine Inspection

Conduct routine inspections to identify any signs of wear, tear, or damage that require immediate attention.

Safety Measures Post-Cleaning

Upon completing the cleaning process, perform a comprehensive safety check to ensure the gun is fully assembled and devoid of any obstructions or potential hazards.

Store the gun in a secure location, out of reach of children and pets.


In this article, we have shown you how to clean Bug A Salt gun in three easy steps. By following these steps, you will ensure that your Bug A Salt gun is always ready to blast away those pesky insects with a pinch of salt.

A clean and functional Bug A Salt gun will provide you with hours of fun and satisfaction, as well as a safe and eco-friendly way to control pests.

We hope you found this article enjoyable and gained new insights. Why not give this cleaning method a try and see the difference for yourself!


  1. How frequently should I clean my Bug-A-Salt gun? Regular cleaning after each use is recommended. If used infrequently, a monthly cleaning routine is advisable.
  2. Can I use water for cleaning the gun? While using water sparingly with a damp cloth is acceptable for external surfaces, avoid direct exposure to water inside the gun to prevent damage.
  3. What should I do if the gun malfunctions after cleaning? Check for any misaligned parts or residue buildup and refer to the manual for troubleshooting steps.
  4. Is it necessary to disassemble the gun for cleaning? In many cases, complete cleaning can be accomplished without disassembling the entire gun. However, for more thorough or specific maintenance, disassembly might be recommended as per the manufacturer’s instructions.
  5. Can I use oil for lubrication after cleaning? No, avoid using oil as it can attract dirt and potentially damage the gun.

Thanks for reading our post on “How to Clean Bug A Salt Gun”. Visit MyTechBlogz for more informative posts.

Share Via

I'm Mubeen Siddiqui, a mechanical engineer with a passion for writing. My mission is to simplify complex topics, exploring not only technology and engineering but a variety of subjects. Join me in delving into these areas through my informative blog posts.

Leave a Comment